Cummins R2.8 Turbo Diesel to Toyota R151F Pre-1996
- Bolts Cummins R2.8 to Toyota R150 and R151
- Designed for the 1996 and older short input shaft
- External slave
Parts included in Kit:
| QTY | Description | Part# & Location |
| 1 | Bell Housing | QDB-2 |
| 1 | Throw Out Bearing | N083SA |
| 1 | Clutch Fork | QDB-220023 |
| 1 | Pivot Ball Assembly | QDB-220124 |
| 1 | Flywheel | QDB-210109 |
| 1 | Flywheel Bushing Insert | QDB-210016 |
| 1 | Pilot Bushing | 6201DDUC3E |
| 1 | Pressure Plate | 361675 (10.5" Mopar) |
| 1 | Clutch Disc | QDB-210120 (21 Spline 10.5") |
| 1 | Slave Cylinder & Fitting | MN-00003 |
| 1 | Fork Retainer | QDB-210001 |
| 1 | 5/16-18x.75" hex head | Fork Retainer |
| 1 | 5/16 lock washer | Fork Retainer |
| 9 | M10-1.25x35mm flange hex head | Transmission to Bell |
| 12 | M10-1.5x40mm SHCS | Engine to Bell |
| 12 | M10 SAE flat washer | Engine to Bell |
| 2 | 5/16-18x1.25" Hex Head | Slave Cylinder |
| 2 | 5/16 flat washer | Slave Cylinder |
| 2 | 5/16 lock washer | Slave Cylinder |
| 6 | 3/8-16x1.0" hex head | Clutch |
| 6 | 3/8 lock washer | Clutch |
| 1 | 3/8-16x3.5" Full Thread Hex Head | Pivot Ball |
| 1 | 3/8-16" Nut | Pivot Ball |
| 7 | M10 Flat Washer | Pivot Ball |
