Radiator Package for Land Rover Defender V8 Swap:
- Designed for The 4.8, 5.3. 6.0 GM LS v8 engine
- Core manufactured in the USA by Bell; End tanks manufactured by Quick Draw Brand
- Core utilitizes new Bar and Plate center cores
- Radiator core is 2.75" thick
- Physical Dimension of Radiator 30.25"x 18"x 6" including necks
- Reliefs on both sides to pass transmission cooler/ ac lines thru
- Flexibility of bolt on inlets, provide straight inlet has 1.75" top neck and 2" bottom neck that avoids the power steering gear box
- Comes assembled with marine anti Seize on Zinc coated grade 8 bolts
- All cast parts are A356-T6 and cores are 3003
- Includes upper mounts and rubber isolators that bolt to existing M6 threaded holes on fenders
- Includes lower weld on mounts and rubber isolators; Original Mounts needed removed.
- Works with Fan Shroud AI-00022
- Kit# AI-00024
- Made in the USA
- Item is non-returnable
Parts Included in Kit:
| Qty | Description | Part# & Location |
| 1 | 24x18x2.75 Bell core | RAX275180240 |
| 2 | Radiator Tank | QDB-220171 |
| 1 | Lower 70 Degree Rad Neck | QDB-220181 |
| 1 | Upper Straight Rad Neck | QDB-230073 |
| 2 | Lower Radiator Isolator | 52079884AA |
| 2 | Defender Frame Mount | QDB-230074 |
| 2 | Dash 928 O Ring High Temp Silicn | 1173N695 |
| 4 | 5/16-18-2.00" Yellow Hex Uppr Neck | 91257A591 |
| 2 | 5/16-18-2.00" Yellow Hex Lower Neck | 91257A591 |
| 2 | 5/16-18-3.50 Yellow Hex Uppr Rad Neck | 91257A597 |
| 4 | M8 Oversized flat washer Round Mnts | 91100A160 |
| 8 | 5/16 ID lock washer upper & lower rad | 91113A030 |
| 4 | 5/16 SAE Flat washer zinc Lower neck | 90126A030 |
| 1 | 1/2-20x6.5" SHCS Steering bolt | 90044A193 |
| 1 | 1/2-20 Yellow Distorted flange lock nut Steering Box | 90949A219 |
| 2 | 1/2 Yellow SAE Flat Washer Steering box | 98023A033 |
