Tremec TR4050 4x4 5 Speed to GM Small Block Big Block V8 External Slave
- Designed around Factory GM flywheel and 1.125" (1 1/8) 10 Spline Clutch
- Made in the USA
- 356 T6 Aluminum
- Kit: AD-00031
- Works with Tremec TR4050 5 Speed 4x4 Manual Transmission
- This package is External Slave application
- Used a 1998 Mopar Slave cylinder with .75" bore
Parts included in Kit:
| Bell Housing | Part# QDB-210145 |
| T.O. Bearing | Part# QDB-220044 |
| Clutch Fork | Part# 53006388 |
| Pivot Ball | Part# 52087542 |
| Pivot Ball Retainer | Part# 4338855 |
| Qty 2: M12-1.75x40mm | Socket Head Cap Screw (Lower Trans to Bell) |
| Qty 2: M12-1.75x60mm | Socket Head Cap Screw (Upper Trans to Bell) |
| Qty 4: M12 Washer | Flat (Bell to Trans) |
| Qty 2: M12-1.75 Nut | Flange Lock (Upper Trans to Bell) Nut mounted outside Bell |
| Qty 2: 3/8-16x4" | Hex Head Bolt (Bell to Engine) |
| Qty 4: 3/8-16x1.5" | Hex Head Bolt (Bell to Engine) |
| Qty 6: 3/8 Washer | Flat (Bell to Engine) |
| Qty 2: 5/16-18x1.25" | Hex Head Bolt (Slave Cylinder) |
| Qty 2: 5/16 Washer | Flat (Slave Cylinder) |
| Qty 2: 5/16 Washer | Lock (Slave Cylinder) |
| T.O. Bearing Snout | Part# QDB-220026 |
| Qty 2: 5/16-18x1.25" | Head Head Bolt (T.O. Bearing Snout) |
| Dust Cover | Part# QDB-220057 |
| Qty 2: 3/8-16x1" | Head Head Bolt (Dust Cover) |
| Qty 2: 3/8-16 Nut | Lock (Dust Cover) |
| Pilot Bushing | Part# QDB-210128 |
Dimensions:
Thickness from Engine block to Transmission Face: 6.75"
Weight: 24 lbs
