QTY |
Description |
Part# and Location |
1 |
Cummins 4 Cylinder crate engine |
5467046 |
- |
Complete Front-end accessory drive |
|
- |
Vacuum Pump |
|
- |
Remote fuel/ Water separator |
5268019 |
- |
Mass Air Flow Sensor and Housing |
4984760 |
- |
Engine Wiring Harness and ECM |
|
- |
Starter |
|
- |
Universal Wiring Harness |
|
- |
Throttle Pedal |
|
- |
J1939 Can Dash Display |
|
- |
Owners Manual |
|
|
Installation Guide |
|
1 |
Tremec TR4050 |
TDET17341 |
1 |
Shifter Lever |
QDB-220035 |
1 |
Clutch Kit |
05065 |
1 |
Bell Housing |
QDB-210137 |
1 |
Pivot Ball |
MN-00005 |
1 |
Flywheel |
QDB-210109 |
1 |
Flywheel Insert |
QDB-210015 |
1 |
Pilot Bushing |
QDB-210058 |
1 |
Clutch Fork |
QDB-220021 |
1 |
Clutch Fork Retainer |
QDB-210001 |
1 |
T.O. Bearing |
N1765SA (1999 PowerStroke) |
1 |
T.O. Bearing Snout |
QDB-220025 |
1 |
Clutch Alignment Tool |
GM-10, TAT 5301 |
1 |
Slave Cylinder |
MN-00003 |
1 |
Universal Motor Mounts |
MT-00009 |
1 |
TR4050 LT230 adapter kit |
TR-00002 |
2 |
5/16-18x1.5" |
Hex Head (Snout) |
3 |
5/16 Lock Washer |
(Fork Retainer & Slave Cylinder) |
2 |
5/16-18x1.25" |
Hex Head (Slave Cylinder) |
2 |
5/16 Flat Washer |
(Slave Cylinder) |
1 |
5/16-18-.75" |
Hex Head (Clutch Fork Retainer) |
6 |
3/8-16x1.0" |
Hex Head (Clutch) |
6 |
3/8 Lock Washer |
(Clutch) |
12 |
M10x1.5x40mm |
SHCS (Bell to Engine) |
12 |
M10 SAE Flat Washer |
(Bell to Engine) |
2 |
M10 SAE |
Flat Washer (Pivot Ball Shim) |
2 |
M12-1.75x40mm |
SHCS (Lower Bell to Trans) |
2 |
M12-1.75x50mm |
SHCS (Upper Bell to Trans) |
2 |
M12-1.75mm |
Nylon Lock Nut (Upper Bell to Trans) |
4 |
M12 Flat Washer |
(Bell to Trans) |