Chevy Small Block BOP to 93-97 LT1 Tremec T56 6 Speed Bell Housing
- Mates to GM SBC, BBC, and BOP
- Works with the 1993 to 1997 Camaro and Firebird T56 6 Speed
- 356 T6 Aluminum
- Made in the USA
- Fits 283, 305, 327, 350, 400 sb, 454 etc.
- Works with Solid Flywheel/ Lightweight Factory Flywheel
- Generic Single disk Clutch Kit 1.125" 26 Spline
- Designed around a 2015 Nissan 350Z Slave Cylinder and Bleeder Line
- Works with a .75" bore Master Cylinder, same as factory 3rd and 4th gen Camaro
- Will require front cover removal to install Bearing Index Sleeve and new seals
- Kit# AD-00038
Parts included in Kit:
| Bell Housing | Part# QDB-220077 |
| Dust Cover | Part# QDB-210087 |
| Qty 1: 1/4-20x.5" | Hex Head (Dust Cover) |
| Qty 1: 1/4 Washer | Flat (Dust Cover) |
| Qty 4: 7/16-14x1.0" | Hex Head (Dust Cover) |
| Qty 4: 7/16 Washer | Flat (Dust Cover) |
| Slave Cylinder | Part# 804592 |
| Slave Bracket | Part# QDB-210053 |
| Hydraulic Fitting | M10x1.0 |
| Qty 1: 1/4-20x.5" | Hex Head (Bleeder Line) |
| Qty 1: 1/4 Washer | Flat (Bleeder Line) |
| Qty 1: 1/4 Washer | Lock (Beeder Line) |
| Qty 2: 1/4-20x1.0" | Hex Head (Slave Cylinder) |
| Qty 2: 1/4 Washer | Flat (Slave Cylinder) |
| Qty 2: 1/4 Washer | Lock (Slave Cylinder) |
| Bearing Indexer | Part# QDB-210055 |
| Oring Bearing Indexer | Part# 134 |
| Shaft Rotary Seal | Part# 12364 |
| Qty 8: M10-1.5x40mm | Socket Head Cap Screw (Bell to Trans) |
| Qty 8: M10 Washer | Flat (Bell to Trans) |
| Qty 6: 3/8-16x1.5" | Hex Head (Bell to Engine) |
| Qty 6: 3/8 Washer | Flat (Bell to Engine) |
Dimensions:
Thickness from Engine block to Transmission face: 5.5"
Weight: 36 lbs
