Cummins R2.8 Turbo Diesel Engine with Land Rover ZF 4HP24 Land Rover Adapter Kit
- New 4 cylinder Cummins R2.8 Crate Engine (Part#5467046)
- Bell housing bolts the transmission directly to the engine
- Engine carries a 2 year 2600 hour warranty covered thru Cummins (Buyers in USA ONLY)
- Due to Emission regulations, engine must be installed in vehicles 1999 or older, will require VIN at purchase
- R2.8 Engine is not supported under warranty for Buyers outside of the United States
- Best performance with a 1.2 ratio Transfer Case
- Recommended to use Medium size Torque Converter
- Kit# EN-00008
Parts included in Kit:
| QTY | Description | Part# and Location |
| 1 | Cummins 4 Cylinder crate engine | 5467046 |
| - | Complete Front-end accessory drive | |
| - | Vacuum Pump | |
| - | Remote fuel/ Water separator | 5268019 |
| - | Remote Oil Filter | 5308354 |
| - | Remote Oil Filter Manifold | 5209233 |
| - | Mass Air Flow Sensor and Housing | 4984760 |
| - | Engine Wiring Harness and ECM | |
| - | Starter | |
| - | Universal Wiring Harness | |
| - | Throttle Pedal | |
| - | Oil Fittings | |
| - | J1939 Can Dash Display | |
| - | Owners Manual | |
| Installation Guide | ||
| 1 | Bell Housing | QDB-210117 |
| 1 | Flex Plate | QDB-210136 |
| 1 | Flex Plate Stiffener | QDB-220036 |
| 1 | Starter Spacer | QDB-210040 |
| 1 | T.C. Plate | QDB-210135 |
| 1 | Crank Spacer Hub | QDB-210085 |
| 6 | 3/8-16x1.0" | Hex Head (Flex Plate to T.C. Plate) |
| 6 | 3/8 Lock Washer | (Flex Plate to T.C. Plate) |
| 12 | M10-1.5x40mm | SHCS (Bell to Engine) |
| 12 | M10 SAE Flat Washer | (Bell to Engine) |
| 3 | M10-1.5x45mm | SHCS (Starter) |
| 3 | M10 Flat Washer | (Starter) |
Dimensions:
Length from Harmonic Balancer to rear face of Bell Housing: 32.75"
