Tremec TR 4050 5 speed to Ford Modular V8 Bell Housing
- Fits 4.6, 5.0 (Coyote), 5.4, 6.2, 6.8, & 7.3 (Godzilla) gas engines
- Internal Slave Kit
- Thick aluminum wall casting
- Requires spacer plate # AC3E-6A373-BA and dust cover # 6L2Z-7986-AA
- Kit #AD-00065
- Made in the USA
Parts included in the Kit:
| Qty | Description | Part# & Location |
| 1 | Ford Modular to T56 Bell Housing | QDB-220137 |
| 5 | M10x1.5x55mm SHCS | Bell to Engine |
| 2 | M10x1.5x65mm SHCS | Bell to Engine |
| 7 | M10 Flat Washer | Bell to Engine |
| 4 | M12x1.75x45mm Hex Head | Bell to Trans |
| 4 | M12 Flat Washer | Bell to Trans |
| 3 | M8x1.25x35mm Hex Head | Starter |
| 5 | M8 Flat Washer | Starter and Dust Cover |
| 2 | M8x1.25x20mm Hex Head | Dust Cover |
1 Review
-
Bell housing
Fit and finish were good. I was baffled about the big rectangular hole in the driver’s side, since this was a internal slave cylinder bell housing.
