Welcome to the new Quick Draw Brand website. As we upload all our great products feel free to reach us at sales@quickdrawbrand.com for parts not displayed.

phone: 513-712-4844

Quick Draw Brand

Engine and Adapter - Cummins R2.8 Crate engine & Tremec TR4050 Adapter Kit

$11,490.00
No reviews yet Write a Review
SKU:
EN-00014
Weight:
777.00 LBS
Width:
40.00 (in)
Height:
44.00 (in)
Depth:
41.00 (in)
Shipping:
Calculated at Checkout

Cummins R2.8 Turbo Diesel Engine with Tremec TR4050 5 speed Manual Transmission Adapter Kit

  • New 4 cylinder Cummins R2.8 Crate Engine  (Part#5467046)
  • Adapter works with the Tremec TR4050 5 Speed 4x4 Transmission (TDET17341)
  • Bell housing bolts the transmission directly to the engine
  • Designed to work with 1998 Jeep 4.0L 10.5″ 10 Spline clutch kit Part# 05065
  • Transmission rated similar to NV4500 in strength
  • Direct bolt up to 1998 Jeep Wrangler Slave cylinder (External Hydraulic)
  • Engine carries a 2 year 2600 hour warranty covered thru Cummins (Buyers in USA ONLY)
  • Due to Emission regulations, engine must be installed in vehicles 1999 or older, will require VIN at purchase
  • R2.8 Engine is not supported under warranty for Buyers outside of the United States
  • Kit# EN-00014

Parts included in Kit:

QTY Description Part# and Location
1 Cummins 4 Cylinder crate engine 5467046
- Complete Front-end accessory drive  
- Vacuum Pump  
- Remote fuel/ Water separator 5268019
- Remote Oil Filter 5308354
- Remote Oil Filter Manifold 5209233
- Mass Air Flow Sensor and Housing 4984760
- Engine Wiring Harness and ECM  
- Starter  
- Universal Wiring Harness  
- Throttle Pedal  
- Oil Fittings  
- J1939 Can Dash Display  
- Owners Manual  
  Installation Guide  
1 Bell Housing QDB-210137
1 Pivot Ball 52087452
1 Flywheel QDB-210109
1 Flywheel Insert QDB-210015
1 Pilot Bushing QDB-210058
1 Clutch Fork QDB-220021
1 Clutch Fork Retainer QDB-210001
1 T.O. Bearing N1765SA (1999 PowerStroke)
1 T.O. Bearing Snout QDB-220025
1 Clutch Alignment Tool GM-10, TAT 5301
2 5/16-18x1.5" Hex Head (Snout)
3 5/16 Lock Washer (Fork Retainer & Slave Cylinder)
2 5/16-18x1.25"   Hex Head (Slave Cylinder)
2 5/16 Flat Washer (Slave Cylinder)
1 5/16-18-.75" Hex Head (Clutch Fork Retainer)
6 3/8-16x1.0" Hex Head (Clutch)
6 3/8 Lock Washer (Clutch)
12 M10x1.5x40mm SHCS (Bell to Engine)
12 M10 SAE Flat Washer (Bell to Engine)
2 M10 SAE Flat Washer (Pivot Ball Shim)
2 M12-1.75x40mm SHCS (Lower Bell to Trans)
2 M12-1.75x50mm SHCS (Upper Bell to Trans)
2 M12-1.75mm Nylon Lock Nut (Upper Bell to Trans)
4 M12 Flat Washer (Bell to Trans)

Dimensions:

Length from Harmonic Balancer to rear face of Bell Housing: 31"

Weight:  685lbs