Universal Cummins R2.8 Engine Mounts with Weld to Fit Frame Mounts
- Designed to work with Most steel Frame Rails
- Proven vibration dampening vs competition
- Cut, Grind, and Weld to fit Frame Perches and Engine mounts
- All Steel pieces allow for maximum flexibility during installation
- Made in the USA
- Kit: MT-00009
- Direct Bolt up to the Cummins R2.8
Parts included in Kit:
| Qty | Description | Part # and Location |
| 2 | Frame Mount Bottom | Part# QDB-220107 |
| 4 | Frame Mount Side | Part# QDB-220108 |
| 2 | Frame Mount Middle | Part# QDB-220109 |
| 1 | Pass. Mount Bottom | Part# QDB-220110 |
| 2 | Pass. Mount Side | Part# QDB-220111 |
| 1 | Pass. Mount Middle | Part# QDB-220112 |
| 1 | Driver Mount Bottom | Part# QDB-220113 |
| 2 | Drivers Mount Side | Part# QDB-220114 |
| 1 | Drivers Mount Middle | Part# QDB-220115 |
| 2 | Steel Captured Rubber Isolator | Part# 52058642 |
| 8 | M12-1.75x25mm | Socket Head Cap Screw (Engine Mount) |
| 8 | M12 Washer | Flat (Engine Mount) |
| 2 | 1/2-13x4.5" | Hex Head (Isolators) |
| 4 | 1/2 Washer | Fender Flat (Isolators) |
| 2 | 1/2-13 Nut | Hex (Isolators) |
| 2 | 1/2 Washer | Lock (Isolators) |
| 2 | M10-1.5x35mm | Socket Head Cap Screw (Frame Mount) |
| 6 | M10 Washer | Flat (Frame Mount) |
| 4 | M10-1.5 Nut | Lock (Frame Mount) |
Dimensions:
- Length from Engine to Isolator 4.25"
- Length from Frame to Isolator 8.00"
