R2.8 TPS Relocation Bracket for Cummins Throttle Pedal


Works great for older vehicle installations with tight foot wells.



The Cummins R2.8 uses a drive-by-wire system and the supplied throttle pedal can be difficult to install in some applications. The pedal assembly is rather bulky and sometimes requires hacking up the floorboard to make it work. The Quick Draw TPS Relocation Bracket avoids all of that nonsense and is the perfect solution to your R2.8 accelerator pedal problem.  Our bracket relocates the Throttle Position Sensor (TPS) from the Cummins-supplied pedal to the engine, enabling the use of a traditional throttle cable similar to a Cummins 4BT or carbureted gas engine. This kit also allows the builder to use older TV / Kickdown cable transmissions such as the 700R4 or 727.  The relocation bracket includes a Lokar throttle cable to connect the engine-mounted TPS to your factory pedal, regardless of make or model. The Quick Draw TPS Relocation Brackets allows you to toss the bulky Cummins throttle pedal assembly and saves hours of fabrication time.

Check out this Quick Video that explains how the TPS Relocation Bracket works.

R2.8 TPS Relocation Bracket Includes:

  • Zinc plated or black powder coated steel engine bracket with screw adjustment for transmission TV or idle up while running welder/ PTO
  • Lokar 24″ stainless or black cable with connectors on both ends.  Can be shortened by builder
  • Pedal bracket to attach cable
  • Stainless hardware to attach the TPS to the relocation bracket


Additional information

Weight5 lbs
Dimensions10 × 8 × 8 in