R2.8 Mechanical Fan Hub for Cummins 2.8

R2.8 Mechanical Fan Hub for Cummins 2.8

$165.00

Cummins R2.8 Mechanical Fan Hub

  • 3 heights 1″, 1.5″, 2″
  • all necessary hardware included

Description

Many builders installing the Cummins R2.8 prefer running a mechanical fan but in factory form the R2.8’s fan hub is not very useful. The hub face is far too close to the rest of the engine accessories, and the R2.8’s fan hub bolt circle is also not the same as commonly available fan spacers.

The Quick Draw R2.8 Mechanical Fan Hub adapter makes running a mechanical fan on the R2.8 easy.  Our versatile  Cummins R2.8 fan kit locates the fan  1″, 1.5″, or 2″ from the fan hub, allowing proper positioning of a mechanical clutch fan with a variety of different radiator spacing. Fan-to-radiator spacing is critical for proper cooling performance, and with many builds radiator positioning and clearance isn’t finalized until late in the build process. Instead of getting locked into one spacer width,the Quick Draw kit offers three positions, enabling builders to get fan and radiator positioning dialed in perfectly.

If you would like to purchase a complete fan kit, which includes our fan hub, fan clutch, and reverse-rotation fan in 17-inch or 20-inch diameters, we have that available HERE.

Whats Included:

  • 1″ mechanical fan hub adapter
  • Qty 2 of .5″ thick spacers
  • 3 different height dowels to index themechanical fan clutch
  • Qty 12 different height studs to attach fan clutch to the adapter kit
  • 4 lock washer and nuts

How it Works:

Cummins ships the New R2.8 diesel engine with a fan hub that acts as an idler pulley.  Start by removing the 4 bolts and steel spacer, then attach the 1″ mechanical fan hub adapter to the hub using the factory bolts.  Next, without installing dowel pin, hold the fan in the location you wish it to be and measure which of the three provided heights locates it best.  After confirming which spacing works best, install the necessary dowel pin in the adapter with a rubber mallet and install the needed 1/2″ spacers on the dowel.  Place the fan clutch with fan already installed on the four supplied studs,  install the 4 lock washers, and tighten the nuts.

Parts needed along with this Cummins R2.8 Mechanical Fan Hub Kit:

  • Fan clutch manufactured by Hayden; part number 2796.
  • A REVERSE ROTATION fan. Note that in addition to the fan hub we offer a complete kit that includes the hub, fan clutch, and your choice of 17″ or 20″ fan diameters. Fans can also be sourced from a variety of different aftermarket suppliers.

Additional information

Weight5 lbs
Dimensions6 × 6 × 6 in

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.