Engine and Adapter – Cummins R2.8 Crate engine & Tremec TR4050 Adapter Kit

$9,790.00

Cummins R2.8 Crate engine with Tremec TR4050 Adapter Kit

Description

Cummins R2.8 Turbo Diesel Engine with Tremec TR4050 5 speed Manual Transmission Adapter Kit

  • New 4 cylinder Cummins R2.8 Crate Engine  (Part#5467046)
  • Adapter works with the Tremec TR4050 5 Speed 4×4 Transmission (TDET17341)
  • Bell housing bolts the transmission directly to the engine
  • Designed to work with 1998 Jeep 4.0L 10.5″ 10 Spline clutch kit Part# 05065
  • Transmission rated similar to NV4500 in strength
  • Direct bolt up to 1998 Jeep Wrangler Slave cylinder (External Hydraulic)
  • Engine carries a 2 year 2600 hour warranty covered thru Cummins
  • Due to Emission regulations, engine must be installed in vehicles 1999 or older, will require VIN at purchase
  • Kit# EN-00014

Parts included in Kit:

QTYDescriptionPart# and Location
1Cummins 4 Cylinder crate engine5467046
Complete Front-end accessory drive
Vacuum Pump
Remote fuel/ Water separator5268019
Remote Oil Filter5308354
Remote Oil Filter Manifold5209233
Mass Air Flow Sensor and Housing4984760
Engine Wiring Harness and ECM
Starter
Universal Wiring Harness
Throttle Pedal
Oil Fittings
J1939 Can Dash Display
Owners Manual
Installation Guide
1Bell HousingQDB-210137
1Pivot Ball52087452
1FlywheelQDB-210109
1Flywheel InsertQDB-210015
1Pilot BushingQDB-210058
1Clutch ForkQDB-220021
1Clutch Fork RetainerQDB-210001
1T.O. BearingN1765SA (1999 PowerStroke)
1T.O. Bearing SnoutQDB-220025
1Clutch Alignment ToolGM-10, TAT 5301
25/16-18×1.5″Hex Head (Snout)
35/16 Lock Washer(Fork Retainer & Slave Cylinder)
25/16-18×1.25″Hex Head (Slave Cylinder)
25/16 Flat Washer(Slave Cylinder)
15/16-18-.75″Hex Head (Clutch Fork Retainer)
63/8-16×1.0″Hex Head (Clutch)
63/8 Lock Washer(Clutch)
12M10x1.5x40mmSHCS (Bell to Engine)
12M10 SAE Flat Washer(Bell to Engine)
2M10 SAEFlat Washer (Pivot Ball Shim)
2M12-1.75x40mmSHCS (Lower Bell to Trans)
2M12-1.75x50mmSHCS (Upper Bell to Trans)
2M12-1.75mmNylon Lock Nut (Upper Bell to Trans)
4M12 Flat Washer(Bell to Trans)

Dimensions:

Length from Harmonic Balancer to rear face of Bell Housing: 31″

Weight:  685lbs

Additional information

Weight950 lbs
Dimensions44 × 44 × 44 in

Title