Engine and Adapter – Cummins R2.8 Crate engine & Dodge NV4500 Adapter Kit

$9,790.00

Cummins R2.8 crate engine and NV4500 Adapter kit

Description

Cummins R2.8 Turbo Diesel Engine with Dodge NV4500 5 speed Manual Transmission Adapter Kit

  • New 4 cylinder Cummins R2.8 Crate Engine  (Part#5467046)
  • Adapter works with the 1994 to 2002 Dodge NV4500 and 1996 & Up Chevy NV4500 5 Speed 4×4 Transmission (Either transmission requires the Dodge gas input shaft and bearing collar)
  • Bell housing bolts the transmission directly to the engine
  • Designed to work with 1998 Jeep 4.0L 10.5″ 10 Spline clutch kit Part# 05065
  • Does not work with the early Chevy NV4500
  • Direct bolt up to 1998 Jeep Wrangler Slave cylinder (External Hydraulic)
  • Engine carries a 2 year 2600 hour warranty covered thru Cummins
  • Due to Emission regulations, engine must be installed in vehicles 1999 or older, will require VIN at purchase
  • Kit# EN-00017

Parts included in Kit:

QTYDescriptionPart# and Location
1Cummins 4 Cylinder crate engine5467046
Complete Front-end accessory drive
Vacuum Pump
Remote fuel/ Water separator5268019
Remote Oil Filter5308354
Remote Oil Filter Manifold5209233
Mass Air Flow Sensor and Housing4984760
Engine Wiring Harness and ECM
Starter
Universal Wiring Harness
Throttle Pedal
Oil Fittings
J1939 Can Dash Display
Owners Manual
Installation Guide
1Bell HousingQDB-210122
1Pivot Ball52087452
1FlywheelQDB-210109
1Flywheel InsertQDB-210018
1Pilot BushingQDB-210058
1Clutch Fork53006388
1Clutch Fork Retainer4338855
25/16 Lock Washer(Slave Cylinder)
25/16-18×1.25″Hex Head (Slave Cylinder)
25/16 Flat Washer(Slave Cylinder)
63/8-16×1.0″Hex Head (Clutch)
63/8 Lock Washer(Clutch)
12M10x1.5x40mmSHCS (Bell to Engine)
12M10 SAE Flat Washer(Bell to Engine)
41/2-13×2.0″Hex Head (Bell to Trans)
41/2 Flat Washer(Bell to Trans)

Dimensions:

Length from Harmonic Balancer to rear face of Bell Housing: 32″

Weight:  685lbs

Additional information

Weight950 lbs
Dimensions48 × 40 × 44 in

Title