Universal Cummins R2.8 engine Mounts with Weld to fit Frame Mounts
- Designed to work with Most steel Frame Rails
- Proven vibration dampening vs competition
- Cut, Grind, and Weld to fit Frame Perches
- Cast A356 T6 Engine Mounts (Dipstick Tube upper clip needs loosened to install
- Made in the USA
- Kit: MT-00005
- Direct Bolt up to the Cummins R2.8
Parts included in Kit:
| Qty 2: Mounts | Steel (Frame) |
| Right Engine Mount | Part# QDB-210007 |
| Left Engine Mount | Part# QDB-210006 |
| Qty 2: Isolators | Rubber (QDB-220085) |
| Qty 1: M12-1.75x70mm | Socket Head Cap Screw (Left side Eng. mount) |
| Qty 7: M12-1.75x60mm | Socket Head Cap Screw (Left/Right side Eng. Mount) |
| Qty 4: 1/2 Washer | Flat Thick (4 locations outside of Alum. Bosses) |
| Qty 4: 1/2 Washer | Flat Thin (4 locations between Alum. Boss and Isolator) |
| Qty 2: 1/2x13-6.0" | Hex Head (Thru Rubber Isolator) |
| Qty 8: M12 Washer | Flat (Bolts to Engine Block) |
| Qty 2: 1/2x13 Nut | Hex (Rubber Isolator) |
| Qty 2: 1/2 Washer | Lock (Rubber Isolator) |
| Qty 2: M10x1.5-40mm | Flange Hex Bolt (Rubber Isolator to Frame Perch) |
| Qty 4: M10 Nut | Lock (Rubber Isolator to Frame Perch) |
| Qty 4: M10 Washer | Flat (Rubber Isolator to Frame Perch) |
Dimensions:
Max length for Left Mount between Frame and Engine: 12.5"
Max length for Right Mount between Frame and Engine: 13"
Weight: 38lbs
