Jeep Wrangler JK 3.6 V6 to Tremec TR4050 Adapter Kit
- Direct fit 2012 to 2017 Jeep 3.6 V6
- Fits factory Jeep slave cylinder, cross member mount, driveshafts, flywheel, and clutch kit
- Exhaust cross over tube will need dimpled under transmission
- Made in the USA
- HD 5 speed Tremec Transmission
- Capacity of truck transmission with shift feel and speed of a car
- Bolts directly to 23 Speed NP231 T case found behind the 6 speed manual transmission
- Kit#: AD-00004
- Requires a 1" body lift, shifter comes out of factory shifter hole
- Bell Housing Bolts to Ram 1500 3.6
Parts included in Kit:
QTY | Description | Part# & Location |
1 | 3.6 TR4050 Bellhousing | QDB-210149 |
1 | Clutch Fork | 53006388 |
1 | Pivot Ball | QDB-220124 |
1 | Pivot Ball Retainer | 4338855 |
1 | JK Throw Out Bearing | QDB-220044 |
1 | Flywheel Pilot Bushing | QDB-210076 |
1 | Transmisssion Mount | QDB-220042 |
1 | 5.5" Shifter Relocator | QDB-220062 |
1 | Billet Shift Lever | SLA-01001A |
1 | Shifter Knob | QDB-220058 |
1 | T.O. Bearing Snout | QDB-220026 |
1 | 3/8-24x1" Flange Hex Nut | Shifter Lever |
2 | 1/2-13x1.5" Hex Head Bolt | Bottom Bell to Trans |
2 | 1/2" Flat Washer | Bottom Bell to Trans |
2 | M12-1.75x60mm SHCS | Top Bell to Trans |
2 | M12 Flat Washer | Top Bell to Trans |
2 | M12-1.75mm Flange Lock Nut | Top Bell to Trans |
2 | 5/16-18x1.5" Hex Head Bolt | T.O. Bearing Snout |
2 | 5/16-18x1.25" Hex Head Bolt | Slave Cylinder |
2 | 5/16 Flat Washer | Slave Cylinder |
2 | 5/16 Lock Washer | Slave Cylinder |
3 | M10x1.5x85mm SHCS | Starter |
3 | 3/8-16x3.5" SHCS | Starter |
3 | 3/8 Flat Washer | Starter |
2 | 7/16-14x1" Hex Head Bolt | Transmission Mount |
2 | 7/16 Flat Washer | Transmission Mount |
2 | 7/16 Lock Washer | Transmission Mount |
8 | M10x1.5x60mm SHCS | Bell to Engine |
8 | M10 Flat Washer | Bell to Engine |